EQUIPMENT CLEANINGS
Keep your HVAC equipment working efficiently all season long with an annual maintenance cleaning and inspection.
Preventative maintenance helps improve the equipment's energy efficiency and extends the life of the equipment. These inspections also allow us to identify and address small problems that, if left unnoticed, could grow into larger, more expensive issues.
SCROLL DOWN FOR OUR
EQUIPMENT MAINTENANCE CHECKLISTS
AIR CONDITIONER TUNE-UP
1. Oil Motors
2. Inspect 220v service disconnect
3. Check electrical service panel 220v breaker
4. Check service valves
5. Check fan blade
6. Check refrigerant level
7. Check amperage draw on all motors/compressors
8. Check mfd on all capacitors
9. Check temperature drop
10. Check electrical connections
11. Take temperature readings at supply and return registers
12. Check thermostat
13. Clean air conditioner
14. Open crushed fins where needed
15. Remove all debris from unit
16. Inspect furnace filter
17. Inspect furnace blower
18. Check evaporator coil
19. Check drain for blockages and proper pitch
FURNACE CLEAN + CHECK
1. Clean and inspect heat exchanger
2. Adjust belt
3. Oil motor
4. Clean or adjust pilot
5. Clean flame sensor
6. Check thermocouple
7. Check gas valve
8. Clean burners
9. Check thermostat operation
10. Inspect filter
11. Inspect drain
12. Check temperature rise
13. Check air flow
14. Check draft inducer motor
15. Check blower motor
16. Check control board
17. Check pressure switch
18. Check all safety controls and limits
HUMIDIFIER CLEANING
1. Remove and replace humidifier pad
2. Clean solenoid valve
3. Clean solenoid valve filter
4. Check humidistat
5. Check and clean drain line
6. Clean humidifier pad track
BOILER CLEANING
1. Oil motors
2. Oil pumps
3. Check heat exchanger
4. Clean burners
5. Check and clean pilot and pilot tubing
6. Check thermocouple
7. Check gas valve
8. Check aquastat
9. Check all limits and safety controls
10. Check pressure gauge
11. Check water temperature gauge
12. Check thermostat
